Flooring wire brushing machine Rustica Two

Every finishing process on wood surfaces needs a wire brushing machine to give your timber an aged effect: so industrial customers that produce bespoke flooring can work with Paoloni wire brusher before the color staining application of water based lacqeurs and oil oak finishes as well.


The second stage of the “Paoloni Brushing Line” is represented by the Rustica-Two, an high performance wire brushing machine with two interchangeable heads to performs brushing and ageing operations (for beams and matchboards) as well as the light sanding for rough water-stained surfaces. Thanks to a special cotton brush and the use of a frequency inverter that regulates the spinning speed and the working direction of the brush, it is possible to perform wood polishing works as well. The electronic control panel and the pneumatic lifting sensors allows to fine-adjusting the working pressure. The body in stainless steel makes the machine steady and perfectly able to to manage even the heaviest beams.


The 400 mm wide conveyor belt allows to brush 2 or 3 parallel planks in one step. Upon request it is possible to have the Rustica-Two with wider working widths (600mm or 800mm).


For those wishing to use the complete set of optional brushes, you can choose from:

  • 3 steel brushes with a different diameter of wires (useful to reach softer or deeper wire brushed effects);
  • 3 Tynex/nylon brushes with different grits (light 120, medium 60, rough 36)
  • 2 Scotch Brite brushes to delicately melt and bind oils or waxes to the floorboard surface Cotton brush: for wood polishing.


Hard stell wire brush

Hard stell wire brush

60 grit tynex brush

60 grit tynex brush

120 grit tynex brush

120 grit tynex brush

flatter brush sand paper grit 320-240

Flatter brush sand paper grit 320-240

Medium steel wire brush

Medium steel wire brush

cotton polishing brush

Cotton polishing brush

Scotch brite Drum

Scotch brite Drum



Data Sheet

Size and weight of the machine

  • Length: 150 cm
  • Width: 105 cm
  • Height: 140 cm
  • Total weight: 380 kg

Workable sizes

  • Thickness min. 5mm - max. 135 mm (upon request up to 300 mm)
  • Min. Width 20 - max. 400 mm (upon request 600 mm - 800 mm)
  • Min. Length 300 - max. NO LIMIT

Three-phase power supply:

  • Nominal voltage: 380 V (50 Hz) (adaptable to any international standard)
  • Total power 4,8 kW

Conveyor belt motor

  • 380 V (50 Hz) power supply (adaptable to any international standard)
  • Power 0.37 kW

Brush motor with inverter

  • 380 V (50 Hz) power supply (adaptable to any international standard)
  • Power 4.4 kW
  • Adjustable speed: min. 25 RPM - max. 960 RPM

Production speed

  • Meters / minute: 2 - 15

Electric lifting of the brush with digital indicator

© Artistiko Web Agency